One of the toughest challenges in using the Roger Linn Adrenalinn III pedal (henceforth referred to as the “A3”) is figuring out how to use it! The pedal is nearly perfect, and yet there are ways I want to use it that don’t fit how it was intended to be used.
For starters, the pedal is basically two machines in one: a full-blown digital guitar effect pedal, and a Drum Machine. You can connect the two, but I want to be able to use them completely separately, with two separate sets of controls. The pedal’s buttons can control certain things, but can only change presets up/down. You can use external MIDI commands to switch presets, but you can do either FX or drums, or both together, but you can’t use two different controllers to change presets separately.
My setup is a bit complicated, I’ll admit. I have a rack unit that I want in the MIDI chain, for clock-synced delays AND preset changes. But I want the presets to change with the A3’s FX presets, and NOT the drum patterns. I want the Molten Voltage Master Control (henceforth referred to as the “MC”) to provide clock and PC only for drums… and a second controller to provide PC and CC messages only for the rack unit and the A3’s FX side. I also want to leave the A3’s buttons alone to turn individual things on and off. So how do I make this all work?? Continue reading “Adrenalinn III Pedal Control Project”